Changing The Interval Between Operation Steps - Sony RM-AV2500 Operating Instructions (primary manual) Operating Instructions Manual

To clear a System Control
function programmed for a
Components Select button
1
While pressing COMMANDER
OFF, press VOLUME + and VCR.
2
While pressing the LIGHT button,
press VCR.
The program for the selected button is
erased.
When you want to set a new program
to this Component Select button,
follow Steps 1 to 2 on page 28.
Changing the interval
between operation steps
You can control the interval from 100 –
900 ms in units of 100 ms steps.
3
2
1
While pressing COMMANDER
OFF, press CHANNEL+ and
CHANNEL–.
Learnable SYSTEM CONTROL keys
and number keys flash in the display
panel.
1
4
Continued
29