Getting Started; Installing The Batteries; When To Replace The Batteries - Sony RM-AV2500 Operating Instructions (primary manual) Operating Instructions Manual

Getting Started

Installing the Batteries

Slide open the battery compartment lid
and insert four size AA (R6) batteries (not
supplied). Be sure to line up the + and –
on the batteries with the + and – on the
battery compartment.
6

When to replace the batteries

Batteries for remote control
operation and backlight (four
size AA (R6) batteries)
Under normal conditions, alkaline
batteries will last up to 5 months. If the
Commander does not operate properly,
batteries might be worn out and E is
displayed on the LCD touch panel. When
the display dims or the backlight for the
touch keys grows dim, replace the
alkaline batteries with new ones.
Note
Do not take more than one day to replace the
batteries; otherwise, your setting of the code
numbers (page 8) and learned remote control
signals (page 15) will be erased.
Notes on batteries
• Do not mix old batteries with new ones or
mix different types of batteries together.
• If the electrolyte inside the battery should
leak, wipe the contaminated area of the
battery compartment with a cloth and replace
the old batteries with new ones. To prevent
the electrolyte from leaking, remove the
batteries when you plan not to use the
Commander for a long period of time.