Starting The User Interface During Operation - Siemens 7XV5673 Device Manual

6.2.5

Starting the User Interface during Operation

Starting the User Interface
To start the user interface, proceed as follows:
✧
Start Microsoft Internet Explorer.
✧
Enter the IP address in Microsoft Internet Explorer (for example the default IP address: 192.168.0.55) of
the device. If the user interface does not open up on its own, press the Enter button.
The user interface opens with the Information tab → Show device information input/output window (see
Figure 6-4).
Information Tab
Figure 6-4
Navigation Window of the Information Tab
The navigation window of the Information tab contains the elements Show Device Information, Save device
information and message logs and the Message Logs menu with the elements Operational log and Error
log.
SICAM I/O Unit, 7XV5673, Device Manual
E50417-H1040-C484-A3, Edition 05.2012
Information Tab, Show Device Information Input/Output Window
6.2 Start and Design of the User Interface
6 Operation
55