ResMed S8 AutoSet Spirit II Clinical Manual page 45

To attach an S8 adapter to an S8 device:
1. Unplug the device from the wall.
2. Remove the module currently attached to the S8 device (I-1).
3. Press and hold down the button on the adapter (I-2 a), while pushing it onto
the device.
4. Connect one end of the cable to the adapter, and the other end to the
computer.
Removing an S8 adapter
To remove the S8 adapter:
Note: The device should be turned off when removing an adapter and attaching
a module.
1. Press and hold down the button on the adapter (I-3 a), while pulling it off the
S8 device.
2. Attach another module to the S8 device according to the instructions for that
module.
See the manual for your PC application for information about downloading data
to your computer.
S8 Data Management Products 39