Smart Data In The Patient Menu - ResMed S8 AutoSet Spirit II Clinical Manual

Smart Data in the Patient Menu

A Smart Data feature has been incorporated in the S8 AutoSet Spirit II device to
increase patient involvement in their therapy. Display of Smart Data for the
patient to review is at your discretion. Select some or all options for display in the
patient menu from the Smart Data submenu in Clinical Menu, Options (see
Figure 9, Options menu screens, on page 22). The following data can be made
available, showing, for the most recent session:
•
the star rating of the 70th centile mask fit
•
95th centile pressure
•
total duration of session (usage).
Set the Mask Fit, Pressure or Usage options to ON to enable the patient to see
any or all of this data.
If the Auto Appear option is set to OFF, the data will be displayed in the Results
submenu of the patient menu only. If you (or the patient) set Auto Appear to ON,
the data for the previous session will be displayed after the patient restarts the
device.
Data for the current session are available for display up until noon, when a new
session commences.
Note: If none of the Smart Data options (Mask Fit, Pressure, or Usage) has
been set to ON in the clinical menu, the Results submenu is not displayed in the
patient menu.
Patients can use a Smart Data diary to monitor their therapy. You can download
a PDF of the Smart Data diary for S8 AutoSet Spirit II from www.resmed.com.
Data Management Using the Menus 33