Step 4: Presetting Radio Stations - Sony MHC-RX100AV Operating Instructions Manual

Note
When setting the time, set the equalizer display to
anything other than Spectrum analyzer pattern 3
(See "To change the equalizer display" on page 34).
Step 4: Presetting
radio stations
The 3 band model lets you preset up to 40
stations, 20 for FM, 10 for MW and 10 for LW.
The 4 band model lets you preset up to 45
stations, 20 for FM, 10 for MW, 10 for LW and
5 for UKV.
3,5
POWER
0 )
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
The bands you can receive vary
depending on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press this button, the
band changes as follows:
3 band model:
FM n MW n LW
4 band model:
FM n MW n LW n UKV*
* "STEREO PLUS" is displayed when you
select UKV.
6 2 1 4
π
·∏
§
2
Press TUNING MODE repeatedly to
select "AUTO".
3
Turn the jog dial.
The frequency indication changes and
scanning stops when the system tunes in
a station. "TUNED" and "STEREO" (for
a stereo programme) appear.
AUTO
4
Press TUNER MEMORY.
A preset number appears in the display.
AUTO
5
Turn the jog dial to select the preset
number you want.
6
Press ENTER/NEXT.
The station is stored.
7
Repeat steps 1 to 6 to store other
stations.
TUNED
STEREO
VOLUME
MHz
Preset number
TUNED
STEREO
VOLUME
continued
9