The Tape Deck Recording On A Tape Manually - Sony MHC-RX100AV Operating Instructions Manual

The Tape Deck
Recording on a tape
manually
You can record from CD, tape, or radio as
you like. For example, you can record just the
songs you want or record from the middle of
the tape. The recording level is adjusted
automatically.
POWER
0 )
º ‚
ª ·
π
§
DOLBY NR
1
Insert a blank tape into deck B.
2
Press FUNCTION repeatedly until
the source you want to record (e.g.,
CD) appears.
3
Press r.
Deck B stands by for recording. · (for
front side) lights up.
4
Press DIRECTION repeatedly to
select A to record on one side.
Select a (or RELAY) to record on
both sides.
26
6
4
π
·∏
§
º ‚
ª ·
π
§
3 5
π 1
5
Press ∏ on deck B.
Recording starts.
6
Start playing the source to be
recorded.
To
Stop recording
2
Pause recording
Tips
• If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that "DOLBY NR B" appears after pressing r.
Press
π on the deck B
∏ on the deck B