Dj Effects; Looping Part Of A Cd; Flashing Part Of A Cd - Sony MHC-RX100AV Operating Instructions Manual

DJ Effects

Looping part of a CD

— Loop
With the loop function, you can repeat part of
a CD during playback. This lets you create
original recordings.
LOOP jog dial
POWER
0 )
/
Press and hold LOOP during
playback at the point you want to
start the Loop function, and release
to resume normal play.
To adjust the loop length
Turn the jog dial while holding LOOP (or
press MUSIC MENU B or b while holding
LOOP on the remote) to select different loop
lengths (LOOP 1~20).

Flashing part of a CD

— Flash
With the flash function, you can "flash" the
CD sound during playback. This lets you
create original recordings.
POWER
π
·∏
§
/
To adjust the flash length
Turn the jog dial while holding FLASH (or
press MUSIC MENU B or b while holding
FLASH on the remote) to select different flash
lengths (FLASH 1~20).
To use LOOP and FLASH together
Press and hold both LOOP and FLASH at the
same time.
Notes
• The loop and flash length cannot be adjusted
• To record the flash effect, use the analog (VIDEO/
FLASH jog dial
0 )
Press and hold FLASH during
playback at the point you want to
start the Flash function, and release
to resume normal play.
during this operation. Adjust the loop and flash
lengths independently beforehand if necessary.
MD OUT) connections or this unit's tape deck.
π
·∏
§
29