The Tape Deck Recording On A Tape Manually - Sony LBT-VR90AV Operating Instructions Manual

The Tape Deck
Recording on a
tape manually
You can record from CDs, tapes, or the radio.
For example, you can record just the desired
songs or begin recording from the middle of a
tape. The recording level is automatically
adjusted.
4
DOLBY NR
1
Insert a blank tape into deck B.
2
Press FUNCTION repeatedly until
the source you want to record (e.g.,
CD) appears in the display.
3
Press r REC.
Deck B stands by for recording, and the
indicator on the · button (for the front
side) lights up green.
4
Press DIRECTION repeatedly until
A appears to record on one side or
ß (or RELAY) to record on both
sides.
36
2
1 5 3
p ª
5
Press P.
Recording starts.
6
Start playing the source to be
recorded.
To Press
p on deck B
Stop recording
P
Pause recording
Tips
• When you want to record on the reverse side,
press ª after pressing r REC in step 3 so the
indicator on the ª button (for the reverse side)
lights up green.
• When you want to reduce the hiss noise in low-
level, high-frequency signals, press DOLBY NR
before step 5 so "DOLBY NR B" appears in the
display.
• When recording from a CD, you can use the jog
dial to select tracks during rec pause mode (after
pressing r REC in step 3 and before pressing P in
step 5).