Functions Relating To Registers - Sony DVS-7300 User Manual

Functions Relating to Registers

To carry out operations on registers, you use the REGISTER menu. This
section describes the functions of the REGISTER menu.
Note
The REGISTER menu does not provide functions for manipulating the
registers used to hold the key snapshots controlled from the key control
section, and the wipe and DME wipe snapshots controlled from the the
FlexiPad.
Listing the registers
In the REGISTER menu, select item 1 (EFFECT) to display a list of the key
frame effect registers, and item 2 (SNAPSHOT) to display a list of the
snapshot registers.
For an example register listing, see page 9-6.
Selecting item 3 (ATTRIB EDIT) or item 4 (CONFIG USER) displays the
following information about the snapshot registers.
Registers used: The display shows which registers contain data (" * ") and
which are empty (" – ").
Attributes: The snapshot registers can have a number of different attributes,
indicated by the following abbreviations.
D: Effect dissolve
T: Auto transition
X: Cross-point disable
1 to 8: GPI output (number refers to GPI port)
For details of the attributes, see the section "Snapshot attributes" (page
7-4).
Write-protect setting: This shows whether the contents of a register can be
overwritten or not. An "L" (for "Locked") is shown for a register whose
contents connot be overwritten.
Register name: You can use the NAME function to set any desired register
name.
9-3
Chapter 9 Registers