Linking Frame Memories - Link - Sony DVS-7300 User Manual

4
Adjust the parameters to move the selected image to the desired position.
Knob
1
2
5
If you selected F2 (LIVE) in step 2, press F7 (INPUT MASK) to select
whether or not to mask the input video.
OFF: Move the whole input video frame.
ON: Move only the portion of the input video frame defined by a
rectangular frame (BOX) or a dedicated pattern. If you choose this
selection, continue to select the mask source type and parameters.
For details, see steps 6 to 9 in the section "Creating a new video
image and writing it to frame memory" (page 6-7).
To return to the moved frame to the center position
Press F5 (POS CENTER).
Linking Frame Memories – LINK
It is possible to link frame memory 2 to frame memory 1.
Linking two frame memories
Use the following procedure.
1
In the FRAME MEMORY 1 menu, select item 4 (LINK).
The LINK menu appears.
MEMORY
LINK
OFF
F1
Parameter Setting
name
H Move Amount of horizontal movement (–50.00 to
+50.00)
V Move Amount of vertical movement (–50.00 to +50.00)
PATTERN
LINK
OFF
F2 F3 F4
Function key indications in the LINK menu
F5 F6 F7 F8
Chapter 6 Frame Memory
F9 F10
(Continued)
6-15