Modification - Sony DVS-7300 User Manual

Key Frame Creation and Editing

Modification

Modifying key frames
Use the following procedure to modify already created key frames.
1
2
3
4
Modifying more than one key frame simultaneously
It is also possible to modify a number of created key frames simultaneously.
There are three slightly different procedures for doing this, corresponding to
the following cases.
• Modifying all key frames including and after a specified key frame
• Modifying all of the key frames
• Modifying all key frames in a specified range
The following description covers the procedures for carrying out these
modifications.
Modifying all key frames including and after a specified key
frame
1
2
3
8-10
Chapter 8 Key Frame Effects
Press the EDIT ENBL button, turning it on.
Stop the effect at the required edit point.
If the edit point is on a key frame, that key frame will be modified; if the
edit point is between key frames, the previous key frame will be
modified.
Create the required new form of the key frame.
Press the MOD button.
This modifies the key frame.
Press the EDIT ENBL button, turning it on.
Stop the effect at the first key frame to be modified.
Carry out the necessary changes.