Saving Effects - Sony DVS-7300 User Manual

Executing and Saving Effects
Notes
• In INDPND mode, even when completion times in different channels are
• It is not possible to make switcher subregisters operate independently of
Disabling the key frame fader lever
Setting F10 (KF FADER) to "DSBL" disables the key frame fader lever.

Saving Effects

When you recall another effect, the current effect is automatically saved in
the currently recalled register. In place of this automatic saving, it is also
possible to save an effect in a specified register.
The automatic effect saving function can be disabled using a setup menu
operation.
For more details, see the section "Changing switcher functions
(OPERATION MODE menu)" (page 14-66).
Saving an effect in a specified register
Use the following procedure.
1
2
3
8-30
Chapter 8 Key Frame Effects
different, moving the fader lever through its complete travel causes a
simultaneous completion of execution, and the effect is thus different from
that of using the RUN button.
each other even when F3 is set to "INDPND".
In the numeric keypad block, press the STORE/LEARN button, turning
it on.
Enter the register number in which you wish to save the effect.
To save the effect in the first empty register after the currently recalled
register, enter a period only.
Press the ENTER button.
This saves the current effect in the specified register.