Wipes
Main and subsidiary modifier link function
When carrying out a pattern mix, you can link the modifier settings for the
main and subsidiary patterns. This function has two modes, as follows.
"FULL LINK" mode: All modifier settings for the main and subsidiary
"SEMI LINK" mode: The modifier parameter values for the main and
Note
When having carried out a pattern mix you execute a wipe, set the modifier
link function to the "FULL LINK" mode. If this function is set to "OFF", or
to the "SEMI LINK" mode, the desired video effect may not be obtained at
the start or finish point of the transition.
4-98
Chapter 4 Basic Operations for Image Creation
patterns are the same. Changing the modifier settings for either pattern
automatically changes the settings for the other.
subsidiary patterns are linked, but each modifier can be switched on or off
independently for the two patterns. If the parameter values of a particular
modifier for the two patterns are different when you select this function,
then the difference between the two values is preserved, so that changing
the value for one pattern changes the value for the other pattern by the
same amount.