Snapshot Operations
DME Snapshot Operations
From the control panel of the switcher, you can save and recall DME
snapshots on up to four channels.
Each DME has registers for 99 snapshots, numbered 01 to 99 as on the
switcher.
To save or recall a DME snapshot
In the numeric keypad section press one of the DME 1 to DME 4 sub-register
selection buttons, to select the corresponding DME. Otherwise, the
procedure is the same as when saving or recalling a switcher snapshot.
Notes
• It is not possible to use the global channel for snapshot operations.
• It is not possible to execute key frames and recall snapshots at the same
• It is not possible to save and recall snapshots in DME-3000.
7-14
Chapter 7 Snapshots
time.
When you recall a DME snapshot, the key frame effect of the specified
number is recalled.