Setting The Speakers - Sony MHC-GN1000D Operating Instructions Manual

x PAUSE MODE (DVD VIDEO and DVD-R/
DVD-RW in VR mode only)
Select the picture in pause mode.
AUTO
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
FRAME
The picture, including subjects
that do not move dynamically, is
output in high resolution.
x TRACK SELECTION (DVD VIDEO only)
Gives priority to the sound track which contains
the highest number of channels when you play
back a DVD VIDEO on which multiple audio
formats (PCM, DTS, MPEG audio, or Dolby
Digital format) are recorded.
OFF No priority given.
AUTO
Priority given.
Notes
• When you set "TRACK SELECTION" to "AUTO",
the language may change. The "TRACK
SELECTION" setting has higher priority than the
"AUDIO" settings in "LANGUAGE SETUP"
(page 44). However, depending on the disc, this
function may not be performed.
• If PCM, DTS, Dolby Digital, and MPEG audio sound
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital, and MPEG audio
sound tracks in this order.
x MULTI-DISC RESUME (DVD VIDEO and
VIDEO CD only)
Turns on and off the Multi-Disc Resume
function. The resume playback point can be
stored in the memory for up to 40 different DVD
VIDEOs or VIDEO CDs (page 21).
ON
Stores the resume playback point
in the memory for up to 40 discs.
OFF Does not store the resume
playback point in the memory.
Playback starts at the resume
playback point only for the current
disc in the system.
x AUDIO DRC (Dynamic Range
Compression) (DVD VIDEO and DVD-R/
DVD-RW in VR mode only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.
OFF
No compression of dynamic
range.
STANDARD
Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
MAX
Narrows the dynamic range fully.
Note
AUDIO DRC can only be performed with Dolby
Digital sources.
x DivX
Display the registration code for this system.
For more information, go to
http://www.divx.com on the Internet.

Setting the speakers

— SPEAKER SETUP
To obtain the best possible surround sound, set
the size of the speakers you have connected and
their distance from your listening position.
Then, use the test tone to adjust the level of the
speakers to the same level.
Select "SPEAKER SETUP" in the Setup menu.
For details, see "Using the DVD setup menu"
(page 43).
The default settings are underlined.
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE:
FRONT:
CENTER:
SURROUND:
SUBWOOFER:
OFF
YES
YES
BEHIND
YES
continued
47 GB