Sony MHC-GN1000D Operating Instructions Manual page 48

To return to the default setting
when changing a setting
Press CLEAR before you press ENTER.
However, note that you cannot return the setting
of "SIZE" to default setting.
Note
You cannot perform SPEAKER SETUP when you
connect headphones or microphones to the unit.
x SIZE
When you connect or disconnect the center
speaker, surround speakers or subwoofer or
when you move the surround speakers, change
the setting for CENTER, SURROUND and
SUBWOOFER. Since the front speaker setting
is fixed, you cannot change them.
Position diagram
A
FRONT
YES
CENTER YES: Normally select this.
NONE: Select this if the center
speaker is not connected.
SURROUND BEHIND: Select this if the surround
speakers are located in section B.
SIDE: Select this if the surround
speakers are located in section A.
NONE: Select this if the surround
speakers are not connected.
GB
48
90
A
45
B B
20
SUBWOOFER YES: Normally, select this
(FST-ZX100D/LBT-ZX100D/
MHC-GN1000D only).
Select this if you have connected an
optional sub woofer (FST-ZX80D/
LBT-ZX80D only).
NONE: Select this if the subwoofer
is not connected (FST-ZX100D/
LBT-ZX100D/MHC-GN1000D
only).
Select this if an optional sub woofer
is not connected (FST-ZX80D/
LBT-ZX80D only).
Notes
• When you change the setting, the sound cuts off for a
moment.
• Depending on the settings of other speakers, the
subwoofer may output excessive sound.
• When you play back a DVD VIDEO that does not
have subwoofer output recorded, no sound is output
from the subwoofer, even if "SUBWOOFER" is set
to "YES".
x DISTANCE
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using QUICK
SETUP (page 14), the settings are automatically
displayed. The items that are set to "NONE" in
"SIZE" cannot be selected.
3.0 m 3.0 m