Sony MHC-GN1000D Operating Instructions Manual page 61

Notes
• You can only select the CHORUS effect in DVD
function.
• The CHORUS effect is automatically set to
"CHORUS OFF" when you:
– turn off the system.
– change the function.
– select the FLANGER or DELAY effect.
• If you activate CHORUS during disc recording, the
sound effect will be recorded onto the tape.
Moving sound effect
— X-ROUND
(FST-ZX100D/LBT-ZX100D/FST-ZX80D/
LBT-ZX80D only)
To enjoy the X-ROUND effect, place your front
and surround speakers at an equal distance from
your listening position (see "Positioning the
speakers (Example 1)" on page 13).
Press one of the X-ROUND buttons
repeatedly (WAVE, FADER, BALANCE,
RANDOM) to select the X-ROUND mode
you want.
"X-ROUND" lights up in the display.
Select To output sound
1)
AUTO WAVE , In circular motion around the
MANUAL room
2)
WAVE
1)
AUTO FADER , Back and forth between the front
MANUAL and surround speakers
2)
FADER
1)
AUTO BAL , Back and forth between the left
2)
MANUAL BAL and right speakers
RANDOM In random X-ROUND mode
1)
You can change the speed of sound movement by
turning the X-ROUND JOG clockwise or
counterclockwise.
2)
You can manually change the sound movement from
one speaker to another speaker by turning the
X-ROUND JOG clockwise or counterclockwise.
To cancel the X-ROUND effect
Press X-ROUND OFF. "X-ROUND OFF"
appears in the display.
Notes
• If you cannot get the sound effect you want, check
the speaker connections.
• When the headphones are connected to the PHONES
jack, X-ROUND mode automatically turns off and
you cannot change the setting.
• When the X-ROUND mode is turned on, the audio
output from the center speaker and subwoofer is cut
off.
• When you press SOUND FIELD or turn on the test
tone, X-ROUND mode automatically turns off.
• You cannot turn on the X-ROUND mode when
– the headphones are connected.
– "SURROUND" in "SPEAKER SETUP" is set to
"NONE".
– test tone is performed.
Creating beat effect
— X-BEAT
(FST-ZX100D/LBT-ZX100D/FST-ZX80D/
LBT-ZX80D only)
You can create the beat effect automatically or
manually.
Creating the beat effect
automatically
1
Press one of the X-ROUND buttons
repeatedly (WAVE, FADER, BALANCE) to
select the X-ROUND mode you want.
2
Press BEAT MAX repeatedly to select
"TEMPO B.MAX" or press BEAT JUMP
repeatedly to select "TEMPO B.JUMP" as
follows:
Select To
TEMPO B.MAX Enhance the sound according
to the tempo of the music.
TEMPO B.JUMP Switch the sound position to
the opposite direction instantly
according to the tempo of the
music.
continued
61 GB