Siemens SIPART PS2 Series Technical Description page 18

Electropneumatic positioners
SIPART PS2
Ordering data
SIPART PS2, PS2 PA, PS2 FF
Selection and Ordering data
Electropneumatic positioner
SIPART PS2, Ex protection without,
EEx ia/ib and EEx n
Version
2-wire (4 to 20 mA)
• Without HART
• With HART, not explosion-protected
2-, 3-, 4-wire (0/4 to 20 mA)
• With HART, explosion-protected
• Without HART, not explosion-
protected
PROFIBUS PA connection
FOUNDATION Fieldbus connection
For actuator
Single-action
Double-action
Casing
Plastic
Aluminum; only single-action
Stainless steel (without window)
Explosion protection
Without
With explosion protection EEx ia/ib
(CENELEC/ATEX/FM/CSA)
With explosion protection EEx n,
(CENELEC/ATEX)
• For zone 2 and zone 22 (dust),
casing: aluminium or stainless steel;
6
each with no window in the cover
1)2)
• For zone 2
casing: aluminium or plastic; each
with window in the cover
Connection thread
electrical/pneumatic
M20 x 1.5 / G¼
½-14 NPT / ¼-18 NPT
M20 x 1.5 / ¼-18 NPT
½-14 NPT / G¼
With plug M12 / G¼
With plug M12 / ¼-18 NPT
Limit monitor
Installed, incl. 2nd cable gland
Without
Alarm module; electronic
(6DR4004-.A)
SIA module; slot-type initiators
(6DR4004-.G)
Limit value contact module (mechani-
cal switching contacts (6DR4004-.K)
6/18 Siemens FI 01 · 2009
© Siemens AG 2008
Order No.
6 D R 5 7 7 7 - 0 7 7 7 7 - 7 7 A 7
} 0
} 1
} 2
} 3
} 5
} 6
} 1
} 2
} 0
} 1 1
} 2
} N
} E
D
G
} G
} N
M
P
R
S
} 0
1
2
3
Selection and Ordering data
Electropneumatic positioner
SIPART PS2, Ex protection without,
EEx ia/ib and EEx n
Optional modules
Installed, incl. 2nd cable gland
Without
Iy module for position feedback
signal (4 ... 20 mA) (6DR4004-.J)
EMC filter module for external
position sensor (C73451-A430-D23)
Iy module and EMC filter module for
external position sensor
Customer-specific design
Without
Brief instructions
German/English
French/Spanish/Italian
Mounted pressure gauge block
Without
Single-action G¼, scaling MPA and
bar
Double-action G¼, scaling MPA and
bar
Single-action ¼-18 NPT, scaling
MPA and psi
Double-action ¼-18 NPT, scaling
MPA and psi
Further designs
Add "-Z" to Order No. and specify
Order code.
Version with stainless steel sound
absorbers
standard with stainless steel enclo-
sures
Measuring point number (TAG No.)
HART tag max. 8 characters,
max. 32 characters for
PROFIBUS PA, FOUNDATION Field-
bus and 4 ... 20 mA version,
specify in plain text: Y17: ........
Measuring point description
HART tag max. 16 characters,
max. 32 characters for
PROFIBUS PA, FOUNDATION Field-
bus and 4 ... 20 mA version,
specify in plain text: Y15: ........
Measuring point text
HART tag max. 24 characters,
max. 32 characters for
PROFIBUS PA, FOUNDATION Field-
bus and 4 ... 20 mA version,
specify in plain text: Y16: ........
TAG plate made of stainless steel,
3-line
Text line 1: Plain text from Y17
Text line 2: Plain text from Y15
Text line 3: Plain text from Y16
Preset bus address
Specify in plain text: Y25: ........
}
Available ex stock
1)
Maximum impact energy to the casing: 1 Joule.
2)
For device versions in plastic casing: it is essential to prevent electrostatic
charging. Maximum torque of the cable gland: 67 Nm.
3)
Only for plastic casing, for other casings on request.
Order No.
6 D R 5 7 7 7 - 0 7 7 7 7 - 7 7 A 7
} 0
1
2
3
} 0
} A
B
} 0
1
2
3
4
Order code
A40
3)
Y17
3)
Y15
3)
Y16
3)
A20
3)
Y25