Adjusting Length (Standard 80° Legrest); Manually Height-Adjustable Legrest; Swivelling And/Or Removing Legrests; Height Adjustable) - Invacare Bora Series User Manual

1. Push release lever inward or outward.
2. Adjust component to desired position.
3. Pull upward to remove component .
5.19.2 Adjusting Length (Standard 80° Legrest)
• 5 mm Allen key
1. Loosen screw (1).
Do not remove screw (1).
2. Adjust component to desired position.
3. Tighten screw.
1528224-Y
Fig. 5-58

5.20 Manually Height-Adjustable Legrest

5.20.1 Swivelling and/or Removing Legrests (Manually

Height Adjustable)

The unlocking knob is located on the top section of the
legrests. When the legrest is unlocked, it can be swivelled
to the inside or outside to facilitate getting in, or can be
completely removed.
1. Press unlocking knob (1) and remove legrests upwards.
5.20.2 Adjusting Legrest Angle (Manually Height

Adjustable)

CAUTION!
Risk of crushing
– Do not reach inside the swivelling range of the
legrest.
Fig. 5-59
Setup
75