Invacare Bora Series User Manual page 123

1 IPX4 classification means that the electrical system is protected against spray water.
2
Static stability according to ISO 7176-1 = 9° (15.8 %)
Dynamic stability according to ISO 7176-2 = 6° (10.5 %)
3
Note: The drive range of a mobility device is strongly influenced by external factors, such as the speed setting of the
wheelchair, the charging state of the batteries, surrounding temperature, local topography, road surface characteristics,
tyre pressure, weight of user, drive style and use of batteries for lighting, servos etc.
The specified values are theoretical maximum achievable values measured according to ISO 7176-4.
4
Measured without seat cushion
5
Width adjustable for side panel adjustment
6
As soon as the lifter is raised above a certain point you can adjust the seat and backrest angles only at a combined
total of max. 15°.
7
Distance between backrest reference plane and most forward part of armrest assembly
8 Horizontal distance of wheel axle from intersection of loaded seat and backrest reference planes
9 The actual kerb weight depends on the fittings your mobility device has been supplied with. Every Invacare mobility
device is weighed when leaving the works. Refer to the nameplate for the kerb weight (including batteries) measured.
1528224-Y
Technical Data
123