Invacare Bora Series User Manual page 107

7. To do this, first place the front of the battery box on the
guide rods and then push the assembly in.
Once the wheelchair is reassembled, you must
ensure that the locking system on the rear
battery box has completely engaged. Check
the correct seating of the locking pins. Also
check the power supply. To do this, switch the
wheelchair on at the remote. If the electric
wheelchair is not ready to drive, check that the
battery box has been fitted correctly.
8.
Secure the battery belt with the safety clip (1).
1528224-Y
Transport
107