Invacare Bora Series User Manual page 46

Invacare® Bora/Spectra XTR Series
• 4 mm Allen key
1. Loosen screws A.
2. Move joystick or switch to desired position on the
linkage.
3. Tighten screws.
Positioning Piko Buttons
Risk of damage to screws
If you tighten screws to an improper torque, they
might either come loose or get damaged.
– Tighten the screws to a torque of 3 Nm ± 10 %.
• 4 mm Allen key
• 7/16 inch wrench
46
Fig. 5-23
1. Loosen screw C.
2. Move holder to desired position.
3. If necessary, loosen nut D.
4. Adjust holder orientation.
5. Tighten screw C and nut D.
Adjusting Height And Depth of Linkage
• 3 mm Allen key
Fig. 5-24
1528224-Y