Deleting A Channel In The Dynamic Zone - Motorola SRX 2200 Model 3.5 User Manual

English
3 or to Channel Name then press the Menu
Select button directly below Sel .
The display shows a blinking cursor on the Channel
Name screen.
4 Use the keypad to type or edit the channel name.
5 Press the Menu Select button directly below Srch
once the entry is done to initiate searching.
You can cancel this operation at this step by
pressing the Menu Select button directly below Cncl
to return to Search Options screen.
The display shows Searching.... Once found, the
display shows Channel updated.
If the radio is triggered to search for an empty entry,
the display shows Invalid entry.
If the entry does not match, the display shows
Channel name not found. Repeat from
step 5 to search again.
6 Press
to return to the Home screen.
92

Deleting a Channel in the Dynamic Zone

The radio must be in Dynamic Zone in order to perform this
operation.
1
or to ZnPr then press the Menu Select button
directly below ZnPr to enter Program Zone screen.
The display shows the dynamic channels list.
2 or
the Menu Select button directly below Del.
The display shows Channel deleted screen.
3 Press the Menu Select button below Exit to return
to Home screen.
The Home screen shows <Dynamic Zone
Channels>.
If the channel deleted is the Home channel, the
step 4 or
Home screen shows <Zone Name>"Blank".
to the saved dynamic channel then press