Call Alert
Allows the radio to function like a pager, or to verify if a
radio is active on the system.
Call Response
Allows you to answer a private call.
Channel
Selects a channel.
Contacts
Selects the Contacts menu.
Dynamic ID (Conventional Only)
Allows you to edit the ASTRO Individual ID and/or MDC
Primary ID of the radio.
Dynamic Priority (Conventional Only)
Allows any channel in a Scan List (except for the
Priority-One channel) to temporarily replace the Priority-
Two channel.
Emergency
Depending on the programming, initiates or cancels an
emergency alarm or call.
Internet Protocol Address
Display the Internet Protocol (IP) address, device name,
and status of the radio.
Location
Determines the current location (latitude, longitude, time
and date), and also the distance and bearing to another
location or turns the GPS functionality on or off for all
locations.
Man Down Clear
Clears the Man Down mode alarm that is triggered
when your radio achieves or passes a tilt angle
threshold or a combination of the angle threshold and a
motion sensitivity level.
Message
Enters the current message list.
Mode Select
Long-press programs a button with the current zone
and channel of the radio; once programmed, the short-
press of that button changes the radio zone channel to
the programmed zone and channel.
Monitor (Conventional Only)
Monitors a selected channel for all radio traffic until
function is disabled.
Multiple Private Line (Conventional Only)
Selects the Multiple Private Line lists.
English
45