Motorola SRX 2200 Model 3.5 User Manual page 138

English
• Press the preprogrammed User Login button.
• or to User, and press the Menu Select button
directly below User.
The display shows the User Login screen.
2 Perform one of the following actions:
• or to [ID Entry] and press the Menu
Select button directly below Edit. A blinking
cursor appears. Use the keypad to type or edit a
username. Press the Menu Select button directly
below Ok to submit.
• or to scroll through the list of predefined
usernames. Press the Menu Select button
directly below Sel to select the predefined
username.
• Press and hold
of predefined usernames at a fast scroll rate.
Press the Menu Select button directly below Sel
to select the predefined username.
If the selected predefined username has more than
the maximum allowed characters, or an invalid
138
or to scroll through the list
character in it, the display shows momentary
Invalid ID.
3 For radio enabled with Unit ID, perform one of the
following actions:
• or to [UnitID Entry] and press the Menu
Select button directly below Edit. A blinking
cursor appears. Use the keypad to type or edit a
Unit ID. Press the Menu Select button directly
below Ok to submit.
• or to scroll through the list of predefined
Unit IDs. Press the Menu Select button directly
below Sel to select the predefined Unit ID.
• Press and hold or
of predefined Unit IDs at a fast scroll rate. Press
the Menu Select button directly below Sel to
select the predefined Unit ID.
If the selected predefined Unit ID has more than the
maximum allowed characters, or an invalid character
in it, the display shows momentary Invalid
UnitID.
4 Enter your password when you see a blinking cursor.
to scroll through the list