Adjusting The Speaker Levels And Balance (Test Tone) - Sony STR-DA3200ES Operating Instructions Manual

Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening the test tone from your
listening position.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
2,
12
1
Turn on the receiver and TV.
2
Press ON SCREEN.
Switch the input of the TV so that the
setting menu is displayed on the TV
screen connected to this receiver.
3
Press RECEIVER.
Receiver operation is enabled.
4
Press MENU.
The list of setting menus appears.
80
GB
5
Press V/v repeatedly to select
"Level Settings," then press
to enter.
6
Press V/v repeatedly to select
"TEST TONE," then press
7
Press V.
The test tone is output from each speaker
in sequence.
Also, if you press
become the "FIX" pattern in which the
test tone is output from the selected
speaker only.
8
1
Press
9
Adjust the speaker level and
balance using the Level
Settings menu so that the level
3
of the test tone sounds the
same from each speaker.
For details on the Level Settings menu,
see page 60.
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–.
• The adjusted value is shown on the display
5-11
during adjustment.
10
Press V/v repeatedly to select
"TEST TONE," then press
4
11
Press v to select "OFF," then
press
The test tone turns off.
12
Press ON SCREEN.
The menu setting display disappears.
v
, the pattern will
to enter.
.
.
.