Resetting Sound Fields To The Initial Settings - Sony STR-DA3200ES Operating Instructions Manual

When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely. Check to see if they are connected
securely and cannot be disconnected by
pulling on them slightly.
• The speaker cords may have the short-circuit
problem.
When a test tone is output from
a different speaker than the
speaker displayed screen
The location where you set up the speaker (for
example, the front speaker position) and type
of the speaker terminal you connected (for
example, the surround back speaker terminal)
are different. Check the speaker allocation.
For more precise adjustment
You can output the test tone or sound source
from two adjacent speakers to adjust their
balance and level.
Then select the two speakers you want to
adjust by selecting "PHASE NOISE" or
"PHASE AUDIO" in step 6.
Resetting sound fields to
the initial settings
1,2
1
Press POWER to turn off the
power.
2
While holding down MUSIC,
press POWER.
"S.F. Initialize" appears on the display
and all sound fields are reset to their
initial setting.
2
81 GB