Playback; Selecting A Component - Sony STR-DA3200ES Operating Instructions Manual

Playback

Selecting a component

1
3
MUTING
1
Press one of the input button.
When you want to select a
component connected to the
PHONO or the MULTI CHANNEL
INPUT jack, press SHIFT and
then press PHONO or MULTI IN.
You can also use INPUT SELECTOR on
the receiver. The selected input appears
on the display. To select a component
connected to the HDMI IN1/2 jack, press
the HDMI button repeatedly. To select a
component connected to the MULTI
CHANNEL INPUT jack, press MULTI
CH IN button.
50
GB
Selected
input
VIDEO 1, 2
VIDEO 3
DVD
1
TV/SAT
TAPE/CD-R
MD/DAT
SA-CD/CD
TUNER
PHONO
MULTI IN
SOURCE
HDMI 1, 2
2
Turn on the component and
start playback.
3
Press MASTER VOL +/– to
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
The initial volume level is set to minimum
(muting).
Components that can be
played back
VCR, etc., connected to the
VIDEO 1 or VIDEO 2 jack
Video camera and TV game,
etc., connected to the VIDEO
3 jack
DVD player, etc., connected
to DVD jack
Satellite tuner, etc., connected
to the TV/SAT jack
Tape deck, etc., connected to
the TAPE jack
MD or DAT deck, etc.,
connected to the MD/DAT
jack
Super Audio CD or CD
player, etc., connected to the
SA-CD/CD jack
Built-in radio tuner
Turntable, etc., connected to
the PHONO jack
Component connected to the
MULTI CHANNEL INPUT
jack
The current input selected for
zone 2 (Activated while
"ZONE 2" is lit.).
HDMI components connected
to the HDMI jack