Siemens SIMATIC MOBY D System Manual page 329

FCC information
Siemens MOBY D SLG D10S
FCC ID: NXW-MOBYD-SLGD10
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference that may cause undesired operation.
Note
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
changes and modifications to this equipment:
Such modifications could void the user's authority to operate the equipment.
IC information
The installer of this radio equipment must ensure that the antenna is located or pointed such
that it does not emit RF field in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada's website www.hc-sc.gc.ca/rpb.
This device has been designed to operate with only the antennas as described in this
manual. Use of further antennas is strictly prohibited per regulations of Industry Canada. The
required antenna impedance is 50 ohms.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Field data
Table C- 15
Limit distance (S
Operating distance (S
Length of the transmission window (L
Width of transmission window (W)
Min. distance from ANT D5 to ANT D5
MOBY D
System Manual, 01/2010, J31069-D0147-A6-7618
Field data for SLG D10S ANT D5
)
g
)
a
)
d
C.2 Discontinued SLG with ANT D5
max. 480 mm (dependent on transponder)
0 to 400 mm (dependent on transponder)
320 mm
128 mm
≥ 2 m
Previous versions
329