Siemens SIMATIC MOBY D System Manual page 150

Write/read devices with RS232 interface
6.1 Overview of SLG with RS 232 serial interface
The following variants are available in accordance with customer requirements:
● SLG D10 with
● SLG D11 with
● SLG D12 with integral antenna
The rugged housing and high degree of protection (IP65) permit use even under the
toughest industrial conditions.
Design and function
The SLG is connected over a serial interface (RS 232) of the PC that supports
communication with PCs or non-Siemens PLCs. Commands and the data to be written or
read must be converted through an appropriate modulator/demodulator circuit.
The transmittable quantity of information between SLG and MDS depends on:
● The speed at which the MDS moves through the transmission window (determined by the
● The length of the transmission window
Use of the C++ library supports rapid programming of the SLG using applications executing
under Windows 9x/2000, NT 4.0 and XP.
Table 6- 1 Overview of SLG with RS 232 serial interface
SLG with ANT Operating
distance S
(depending on
MDS)
SLG D10 ANT D5 0 to 400 mm
ANT D6 0 to 550 mm
ANT D10 0 to 400 mm
SLG D11 ANT D2 35 to 70 mm
ANT D5 0 to 300 mm
SLG D12 0 to 120 mm
Definition of IP65:
● Protection against the ingress of dust (dustproof)
● Complete touch protection
● Protection against water jets
150
– ANT D5
– ANT D6
– ANT D10
– ANT D2
– ANT D5
antenna) of the SLG
Limit distance
S
a g
(depending on
MDS)
480 mm
650 mm
480 mm
90 mm
380 mm
160 mm
Temperature SLG dimensions
range
(L x W x H)
(during
in mm
operation)
-20 to +55 °C 320 x 145 x 100
-20 to +55 °C 320 x 145 x 100
-20 to +55 °C 320 x 145 x 100
-20 to +70 °C 160 x 80 x 40
-20 to +55 °C 160 x 80 x 40
-20 to +55 °C 160 x 80 x 40
System Manual, 01/2010, J31069-D0147-A6-7618
Antenna Degree
dimensions of
(L x W x H) protectio
n
in mm
340 x 325 x 38 IP65
580 x 480 x 110 IP65
1150 x 365 x 115 IP65
75 x 75 x 40 IP65
340 x 325 x 38 IP65
- IP65
MOBY D