Siemens SIMATIC MOBY D System Manual page 310

Previous versions
C.1 Previous MDS version with different MLFB
Metal-free area
Figure C-6
Figure C-7
Note
If the minimum guide values (h) are not observed, a reduction of the field data results. It is
possible to mount the MDS with metal screws (M5). This has no tangible impact on the
range. It is recommended that a test is performed in critical applications.
When installing in the vicinity of metal, observe the instructions in the Section
MOBY D system
310
Metal-free area for MDS D139
MDS D139: Mounting with a spacer
.
System Manual, 01/2010, J31069-D0147-A6-7618
Planning the
MOBY D