Compliance Statements For Nebs; Compliance Statements For Emc Requirements For Acx500 Routers - Juniper ACX500 Quick Start Manual

ACX500 Universal Access Routers Quick Start—ACX500 Outdoor Routers

Compliance Statements for NEBS

Compliance Statements for EMC Requirements for ACX500 Routers

22
When you install the router, always make the ground connection first and disconnect
it last.
Do not work on the system or connect or disconnect cables during electrical storms.
Before working on equipment that is connected to power lines, remove jewelry, including
rings, necklaces, and watches. Metal objects heat up when connected to power and
ground and can cause serious burns or become welded to the terminals.
Failure to observe these safety warnings can result in serious physical injury.
Power cable warning (Japan):
WARNING:
Translation from Japanese—The attached power cable is only for this
product. Do not use the cable for another product.
Some parts of the router may become hot. The following label on the router provides
warning for the hot surface:
If you are installing the GPS antenna, ensure that the antenna is located at a location
away from overhead power lines.
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (that is, DC-I),
as defined in GR-1089-CORE.
Canada on page 23
European Community on page 23
Japan on page 23
United States on page 23
Copyright © 2015, Juniper Networks, Inc.