Deactivating The Lock Mode Temporarily - Sennheiser EM 500 G3 - 02-09 Manual

To cancel the transfer:
Press the STANDBY
" " appears on the display panel of the receiver. " " also appears if no
suitable transmitter was found.

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the
"Auto Lock" menu item (see page 38).
If the lock mode is activated, you have to temporarily deactivate it In order
to be able to operate the receiver:
Press the jog dial.
"Locked" appears on the display panel.
Turn the jog dial.
"Unlock?" appears on the display panel.
Press the jog dial.
The lock mode is temporarily deactivated:
When you are in the operating menu
The lock mode remains deactivated until you exit the
operating menu.
When one of the standard displays is shown
The lock mode is automatically activated after 10 seconds.
The lock mode icon
PEAK B.Ch: 20.30 ew500 G3
40 0
-10 542.625
MHz
30
-20
20
-30
EQ SKM500
10
-40
P + 12dB
RF AF
button on the receiver.
flashes prior to the lock mode being activated again.
Using the receiver
23