Deactivating The Lock Mode Temporarily - Sennheiser EK 100 G3 Manual

ew 100 P G3 Set _529660_0309_Sp9.book Seite 20 Mittwoch, 8. April 2009 6:57 18
Using the devices
¸
20
To transfer the parameters:
Switch the transmitter and the diversity receiver on.
On the receiver, call up the "Sync" menu item.
"Sync" appears on the display panel of the diversity receiver.
Place the infra-red interface of the transmitter (see page 5 to page 7) in front of the
infra-red interface of the diversity receiver ¸.
The parameters are transferred to the transmitter. When the transfer is completed, " "
appears on the display panel of the diversity receiver. The receiver then switches back to the
current standard display.
To cancel the transfer:
Press the ON/OFF button
" " appears on the display panel of the receiver. " " also appears if no suitable trans-
mitter was found (wrong frequency range/wrong generation).

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the
page 23). If the lock mode is activated, you have to temporarily deactivate it In order to be
able to operate the devices:
²
¶
EK 100 G3/SK 100 G3
Press the SET
² ¶
button (EK) or
(SK).
"Locked" appears on the display panel.
Press the rocker
¶ º
button (EK) or
(SK).
"Unlock?" appears on the display panel.
Press the SET
² ¶
button (EK) or
(SK).
The lock mode is temporarily deactivated.
¹
on the diversity receiver.
¸
¶
º
SKM 100 G3
Press the multi-
function switch ¸.
Move the multi-
¸
function switch
upwards/downwards.
Press the multi-
function switch ¸.
"Auto Lock" menu item (see
´
²
µ
SKP 100 G3
Press the SET
button µ.
Press the
button ´/
UP
button ².
DOWN
Press the SET
button µ.