Tape Recording - Aiwa XR-EM70 Operating Instructions Manual

TAPE RECORDING

Basic recording
Use type I (normal) or type II (high/CrO
1 Press zTAPE OPEN/CLOSE to open the tape tray.
2 Insert the recording tape.
Insert with the exposed side facing forward, and the side
En
to be recorded on first facing upward. Press
zTAPE OPEN/CLOSE to close the tape tray.
3 Press FUNCTION on the remote control to select
the TAPE function.
4 Press MODE (REV MODE on the remote control)
to select the reverse mode.
To record on one side only, select p.
To record on both sides, select [.
5 Press FUNCTION on the remote control to select
the source to be recorded.
6 Prepare the source.
To record CD, load a disc.
To record a radio broadcast, tune in the desired station.
To record from connected external equipment, press AUX
and prepare the equipment.
7 Press w REC/REC PAUSE twice to start
recording.
When recording a CD, CD playback starts automatically.
When recording input from connected equipment,
manually start playback of the source.
•Volume or tone adjustment(s) does not affect recording.
When the tape reaches its end, the recording stops.
14
To start CD recording more easily
Insert the tape to be recorded, load the disc, and press
) tapes.
2
SYNCHRO REC. Regardless of the function currently selected,
CD play and tape recording start simultaneously.
•In CD stop mode, tape recording starts from the beginning
of the track.
When CD playback stops, tape recording stops
simultaneously.
•In CD playback mode, the only current track is recorded.
When the current track playback finishes, tape recording
stops. To stop CD playback, press s.
To stop recording
Press s.
To pause recording (only for TUNER or AUX source)
Press wREC/REC PAUSE. Press again to resume.
To record a selected set of tracks from a CD
Program the desired tracks (see "Programmed play") and then
press SYNCHRO REC.
To start recording with the remote control
Press REC MODE repeatedly to display "SYNC REC" or
"REC".
SYNC REC: recording CD
REC: recording radio, CD or connected external equipment
Then press wREC/REC PAUSE to start recording.
When selected "REC", press wREC/REC PAUSE again to
start recording.
To record a 4-second blank space (only for TUNER
or AUX source)
Inserting 4-second blank spaces may help you locate the
beginning of the track.
1 Press d TAPE/REC MUTE during recording or in
recording pause mode.
"REC MUTE" flashes on the display for 4 seconds (a
blank space is added) and then the unit enters recording
pause mode.
2 Press wREC/REC PAUSE to resume recording.
To erase a tape
1 Insert the tape. Set the tape to the desired point if needed.
2 Press AUX.
If optional equipment is connected to the AUX IN jacks, turn
it off.
3 Press wREC/REC PAUSE twice.