Sony DSR-40/40P Operating Instructions Manual page 43

Using this unit as a player with the BVE-600
How to calculate the adjustment value
If the actual IN point shifts forward to the IN point preset on the player
Player VCR
Adjustment value
Recorder VCR
08 (default setting) – number of frames obtained in step 2
Example: To adjust 5 frames
08 – 05 = 03
If the actual IN point shifts backward to the IN point preset on the
player
Player VCR
Adjustment value
Recorder VCR
08 (default setting) + number of frames obtained in step 2
Example: To adjust 5 frames
08 + 05 = 0D
Adjustment value is calculated in hexadecimal.
4
Perform a trial editing and confirm the adjustment result.
Repeat steps 3 and 4 until best possible result is obtained.
1
Set the sync grade (menu 2) to mode number 4, PREROLL & PLAY
in auxiliary mode.
2
Set the VCR device constants in the setting mode.
Chapter 3 Using the Unit as a Player in an Editing System
IN point OUT point
OUT point
IN point
IN point
OUT point
IN point OUT point
43 GB