Display Item Setting; Deadband Setting; Optimum Start Setting - Fujitsu UTY-RNRUZ2 Operating Manual

Password request to the setting item On/Off is set.
(5) Touch the [Change Setting]
on the "Password Setting"
screen.
"Change Setting" screen is displayed. The screen has
3 or 4 pages which are switched by touching the [Next
Page] or [Previous Page].
Change Setting
Auto Off Timer
Weekly Timer
Set Temp. Auto Return
Next
Cancel
Page
Change Setting
Human Sensor Setting
Fan Control for Energy Saving
Initial Setting
Previous Next
Cancel
Page Page
Note
Items that indoor unit does not support are not displayed.
(6) When password request item to be set or cleared is
touched, each setting screen is displayed.
(7) Touch the [On] or [Off].
(Example "Auto Off Timer"
screen)
When the [OK] is touched, the
display returns to the "Change
Setting" screen.
Apply the setting.
(8) When setting is complete,
touch the [OK] on the "Change
Setting" screen.
(Example Page 1/4)
After the setting change screen is displayed, the display
returns to the "Password Setting" screen.
(9) When the [Back] on the
"Password Setting" screen is
touched, the display returns to
the "Initial Setting" screen.

3-8-7 Display Item Setting

(1) Touch the [Display Item Set-
ting] on the "Initial Setting"
screen.
Filter Sign visible/invisible
(2) "Display Item Setting" screen is displayed. Touch the
[Filter Sign] on the "Display Item Setting" screen.
(3) "Filter Sign" screen is displayed. Touch the [Visible] or
[Invisible].
En-21
Password Setting
Change Password
Change Setting
Back
Change Setting
Page 1/ 4
[Off] Set Temp. Range Setting
[On] Anti Freeze
[On] Away Setting
Previous
OK Cancel
Page
Page 3/ 4 Change Setting
[On]
Maintenance
[On]
[On]
Previous
OK
Cancel
Page
Auto Off Timer
On
Off
Cancel
Change Setting
Auto Off Timer
Weekly Timer
Set Temp. Auto Return
Cancel
Password Setting
Change Password
Change Setting
Back
Initial Setting
R.C. Sensor
Setting
Password Setting
Previous
Back
Page
(2)
Display Item Setting
Filter Sign
Room Temp.
When the [OK] is touched, the display returns to the
"Display Item Setting" screen.
Room Temp. visible/invisible
(4) Touch the [Room Temp.] on the "Display Item Setting"
Page 2/ 4
screen.
[On]
(5) "Room Temp." screen is displayed. Select the [Visible]
[On]
or [Invisible].
[On]
Next
OK
(4)
Page
Display Item Setting
Page 4/ 4
[On] Filter Sign
Room Temp.
OK
When the [OK] is touched, the display returns to the
"Display Item Setting" screen.
Apply the setting.
(6) When the setting is complete,
touch the [OK] on the "Display
Item Setting" screen.
After the setting change
screen is displayed, the
display returns to the "Initial
Setting" screen.
OK

3-8-8 Deadband Setting

(1) Touch the [Deadband Setting] on the "Initial Setting"
screen.
Page 1/ 4
(2) "Deadband Setting" screen is displayed. Adjust the
[Off]
deadband with the [ ] or [ ].
[On]
When the [OK] is touched, the display returns to the "Ini-
[On]
tial Setting" screen.
Next
OK
Page
(1)
Initial Setting
Optimum Start
Setting
Note
Depending on a model of the indoor unit, the deadband
is set on the indoor unit side. In this case, the Deadband
Setting is not displayed on this unit. If you want to change
the setting, consult an authorized service personnel.
Page 2/ 3
Master Indoor
Unit Setting

3-8-9 Optimum Start Setting

Display Item
Setting
Next (1) Touch the [Optimum Start Setting] on the "Initial Setting"
Page
screen.
(2) "Optimum Start Setting" screen is displayed. Select the
[On] or [Off].
When the [OK] is touched, the display returns to the "Ini-
tial Setting" screen.
[Visible]
[Invisible]
Cancel OK
[Visible]
[Invisible]
Cancel OK
Page 3/ 3
RC Master/
Deadband Setting
Slave Setting
I.U. Display
Number Setting
Previous
Back
Page
(3)
Filter Sign
Visible
Invisible
Cancel OK
(5)
Room Temp.
Visible
Invisible
Cancel OK
Display Item Setting
Filter Sign [Visible]
Room Temp. [Visible]
Cancel OK
(2)
Deadband Setting
5
°F
Cancel OK