Display Item; Set Temp. Limit; Rc (Remote Controller) Sensor - Fujitsu UTY-RVRY UTY-RVRG UTY-RVRX Operation Manual

5-2-3

Display Item

NOTE
Some items may not be displayed depending on the
model of the indoor unit or the settings of the controller.
(a) (b)
(a) Backward button
Tap to return to the previous screen.
(b) Home button
Tap to move to the temperature setting screen (home
screen).
(c) Toggle button
Enable the items to be displayed on the screen.
Enable
5-2-4

Set Temp. Limit

Power consumption by excessive temperature setting is sup-
pressed by restricting the temperature setting range for each
operation mode of Cool/Dry, Heat, or Auto.
5-2-4-1
(a) Toggle button
Tap to toggle enable/disable.
Enable
5-2-4-1 Set Temp. Limit (settings menu)
NOTE
Some items may not be displayed depending on the
model of the indoor unit.
(c)
Disable
(a)
Disable
(a) (b)
5-2-4-2
(a) Backward button
Tap to return to the previous screen.
(b) Home button
Tap to move to the temperature setting screen (home
screen).
5-2-4-2 Limit of Cool/Dry, Heat or Auto
NOTE
The setting method for Cool/Dry and Heat is the same.
■ Example of the Limit of Cool/Dry screen
(1) Set the upper and
lower temperature
limits.
(2) Tap [OK] to return to
the previous screen.
5-2-5

RC (Remote Controller) Sensor

This setting uses the sensor of this unit to sense the room
temperature. The room temperature can be sensed at a posi-
tion, closer to the person than the indoor unit sensor. Factory
settings is "Disable".
(a) Toggle button
Tap to toggle enable/disable.
Enable
(a)
Disable
En-22