Table of Contents
Advertisement
Item
8
*The HPE ARCS Air Pressure Tubing Kit contains the following components:
•
Aluminum pipe, 1/8" diameter X 18" long, threaded on both ends
•
Aluminum end cap, 1/8" diameter
•
Barbed, threaded NPTF hose end, 1/8" diameter
•
Pipe clamp, galvanized, 3/8"ID X 9/16" long (for HPE Adaptive Rack Cooling System)
•
Pipe clamp, galvanized, 3/8"ID X 11/16" long (for HPE ARCS 42U/48U 600x1600mm Racks)
•
Screw, 5.5x1.81x10 Pan Torx T25
•
Flat washer, M6
•
Plastic barbed tube fittings for air & water, 1/8"
•
Polyurethane Tubing for Water, 5/32"ID, 1/4" OD
HPE ARCS Power Cord Kit
The HPE ARCS Power Cord Kit contains:
•
IEC 60309 32/30A 220/415V 6h/IP44 power cord (Quantity 2)
•
NEMA L22-20P 277/480V 4P/5W power cord (Quantity 2)
HPE ARCS Air Rack Accessory Kit
The HPE ARCS Air Rack Accessory Kit comes with the HPE ARCS 42U/48U 600x1600mm Racks. Use
the parts included in this kit to properly install the racks.
Item
Gasket, 15x15
HPE G2 Rack
Grounding Kit
6
Installation
Description
HPE G2 Rack Baying Kit (Contains
brackets and screws used to bay the
racks together on either a 600mm or 24-
inch pitch.)
Worm drive hose and tube clamps
Panduit boots
Gasket, 15 x 15
Masterkleer PVC clear tubing, 6 ft.
Safety, compliance, & warranty
information
Description
Foam for sealing the rack
Cables, screws, and washers used to
ground the rack through the rack frame
Quantity
2
2
2
1
2
1
Quantity
1
1
Table Continued
Advertisement
Table of Contents
