HP Adaptive Rack Cooling System System Installation Manual page 15

WARNING: To reduce the risk of electric shock, completely remove power before servicing by
disconnecting both power cords.
NOTE: If no secondary power is connected, the transfer switch will indicate a fail status for the
secondary power supply.
9. Guide the other ends of the power cords through the HPE Adaptive Rack Cooling System, and then
plug them into an appropriate power source.
10. Check for any errors on the display screen. If errors are displayed, see " HPE Adaptive Rack Cooling
System troubleshooting" in the HPE Adaptive Rack Cooling System User Guide.
For information on entering network settings, accessing controls, reviewing the details on the info
page, and resetting to factory defaults, see the HPE Adaptive Rack Cooling System Web Interface
Guide.
Installation 15