Table of Contents
Advertisement
6.
Install the upper rear door latch assembly:
•
Route the auto door harness cable through the hole and connect it to the rear door latch
assembly.
•
Align the rear door latch assembly with the screw holes.
•
Use four rear lock mount screws to install the rear door latch assemblies.
•
To prevent electrostatic discharge damage when the door is opened, apply the tape provided in
the HPE ARCS 42U Air Rack Installation Kit to the cable connection.
7.
Align the custom mounting bracket with the screw holes on the door of the HPE Adaptive Rack
Cooling System. Then use the two M5.5X10 Torx pan head tap screws that came with the kit to
install the mounting bracket.
Configuration
33
Advertisement
Table of Contents
