Configuring/Address Space; Operating With "Counting And Measurement" Technology Object; Configuring - Siemens SIMATIC S7-1500 Manual

Configuring/address space

4.1

Operating with "Counting and measurement" technology object

4.1.1

Configuring

Introduction
You configure the technology module and assign its parameters with STEP 7 (TIA Portal).
The technology object is used to control and monitor the functions of the technology module.
System environment
The technology module can be used in the following system environments:
Applications Components required
Central operation
•
with an S7-1500 CPU
•
Distributed operation
•
with an S7-1500 CPU
•
•
Additional information
You can find a detailed description of the counting and measurement functions and their
configuration in the following:
● Function manual Counting, Measurement and Position Detection available for download
on the Internet (http://support.automation.siemens.com/WW/view/en/59709820)
● Information system of STEP 7 (TIA Portal) under "Using technology functions > Counting,
measurement and position input > Counting, measurement and position input (S7-1500)"
Hardware Support Packages (HSP)
If firmware version V1.3 of the module is not yet integrated in your TIA Portal Version V15,
you can integrate a corresponding module using HSP0256.
You can find the Hardware Support Packages (HSP) for download on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/72341852).
You can also access this download from the menu bar of STEP 7 (TIA Portal): "Options >
Support packages > Download from the Internet".
32
S7-1500 automation system
TM PosInput 2
S7-1500 automation system
ET 200MP distributed I/O
system
TM PosInput 2
Configuration software
STEP 7 (TIA Portal):
Device configuration with
•
hardware configuration
Parameter setting with
•
"Counting and measurement"
technology object
Technology module TM PosInput 2 (6ES7551-1AB00-0AB0)
4
In the user program
For incremental/pulse
encoder:
High_Speed_Counter
instruction
For SSI absolute encoder:
SSI_Absolute_Encoder
instruction
Manual, 06/2018, A5E03982218-AB