KVM over IP User Manual
Port Policers
This section provides an overview of QoS Ingress Port Policers for all switch
ports The Port Policing is useful in constraining traffic flows and marking
frames above specific rates. Policing is primarily useful for data flows and
voice or video flows because voice and video usually maintains a steady rate
of traffic.
Web Interface
To configure the QoS Port Policers in the web interface:
1. Click Quality of Service and Port Policers.
2. Click which port need to enable the QoS Ingress Port Policers, and
configure the Rate limit condition.
3. Scroll to select the column Rate and Unit.
4. Click Apply to save the configuration.
5. If you want to cancel the setting then you need to click the Reset button. It
will revert to previously saved values.
Parameter description:
Port:
The logical port for the settings contained in the same row. Click on the port
number in order to configure the schedulers.
152