KVM over IP User Manual
Traceroute
This page allows you to issue ICMP, TCP, or UDP packets to diagnose
network connectivity issues.
Web Interface
To start a Traceroute in the web interface:
1. Click Diagnostics and Traceroute.
2. Specify IP Address, Wait Time, Max TTL and Probe Count.
3. Click Start.
Parameter description:
IP Address:
The destination IP Address.
Wait Time:
Set the time (in seconds) to wait for a response to a probe (default 5.0 sec).
Values range from 1 to 60. The payload size of the ICMP packet. Values range
from 2 bytes to 1452 bytes.
410