KVM over IP User Manual
Components
ES0152 Front View
ES0152P Front View
No.
Component
1
System LED
2
Link/Act/Spd
LED
(ES0152P Only)
3
PoE LED
(ES0152P Only)
4
Indicates if the switch is powered up correctly or not, or,
indicates if there is a system alarm triggered for
troubleshooting.
Refer to System LED on page 5 for the behavior of the LED.
When this LED is lit, the port status LEDs are displaying the
link status, network activity and speed of each port. Refer to
Port Status LED on page 6 for the behavior of the LED.
Users can press the Mode button to toggle between Link/
Activity/Speed mode and PoE mode.
When this LED is lit, the port status LEDs are displaying PoE
powering status of each port. Refer to Port Status LED on
page 6 for the behavior of the LED.
Users can press the Mode button to toggle between Link/
Activity/Speed mode and PoE mode.
ES0152P