The Installation Menu - Sony VPL-CS20 Operating Instructions Manual

The Installation Menu

The Installation menu is used for changing the settings of the projector.
Tilt
Picture
V Keystone:
Background:
Signal
Lamp Mode:
Lens Control:
Function
IR Receiver:
Illumination:
Installation
High Altitude Mode:
Setup
Information
Sel:
Setting items Functions
Tilt... Adjusts the position (height) of the projected picture.
V Keystone Corrects the trapezoidal distortion caused by the projection
angle. Select "Auto" for automatic correction, or "Manual"
for manual correction using the v/V/b/B keys on the
Remote Commander.
When the bottom of the trapezoid is longer than the top
When the top of the trapezoid is longer than the bottom
Background Selects the background color of the screen when no signal
is input to the projector. Select "Black" or "Blue."
Normally, set to "Blue."
Lamp Mode Sets the lamp brightness used during the projection.
• High: Illuminates the projected image brightly.
• Standard: Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the "High" setting.
Lens Control When set to "Off," the LENS (FOCUS, ZOOM) key on the
Remote Commander, and the FOCUS and ZOOM keys on
the projector do not function.
IR Receiver Selects the remote control detectors (IR Receiver) on the
front and rear of the projector.
• Front & Rear: Activates both the front and rear
detectors.
• Front: Activates the front detector only.
• Rear: Activates the rear detector only.
Illumination Selects whether the SONY logo on the rear panel of the
projector lights when the projector is on.
High Altitude Set to "On" when the projector is used at an altitude of
Mode 1,500 m or higher.
Auto
Blue
Standard
On
Front & Rear
On
Off
Set: Exit:
: Sets a lower value.
: Sets a higher value.
Initial setting
Auto
Blue
Standard
On
Front & Rear
On
Off
The Installation Menu
27