Sony VENICE MPC-3610 Operating Instructions Manual page 81

000 81
4. Network: Network Setup and Operations
Connecting using access point auto detection
The unit can connect by detecting connection
access points automatically, without having to
enter the SSID manually.
1
Set Technical > Network > Setting (page 69)
in the full menu to Wireless.
2
Set Technical > Network > Wireless > Network
Mode (page 69) in the full menu to Station.
3
Select Technical > Network > Wireless > Scan
Networks (page 69) in the full menu.
4
Select Execute by turning the MENU dial, then
press the MENU dial.
The unit starts auto detection of connection
access points. When auto detection finishes,
networks available for connection are
displayed in a list.
5
Select the network to be connected by turning
the MENU dial, then press the MENU dial.
6
Select Set to confirm.
A password input screen appears.
7
Enter the password, then select Done.
The Wireless preferences screen appears.
8
Set the following items in Technical > Network
> Wireless in the full menu, then select Set to
confirm.
ˎ DHCP ˎ
ˎ IP Address ˎ
ˎ Subnet Mask ˎ
[Note]
Always use Set to confirm the settings. If the settings are not
confirmed using Set, the configured settings are not applied.
Displaying the Web Remote Control
The web remote control is displayed when the
unit is accessed from the browser of a device. The
web remote control screen is automatically resized
to match the screen size of the connected device.
1
Connect the unit and device as described in
"Connecting the Unit and Device via Wired
LAN" or "Connecting the Unit and Device via
Wireless LAN".
2
Launch a browser on the device and enter
"http://IP address of unit/rm.html" in the URL
bar.
You can check the IP address of the unit using
Info category > System > IP Address
(page 46) in the menu.
For example, if the IP address is 192.168.1.1,
enter "http://192.168.1.1/rm.html" in the URL
bar.
3
Enter the user name and password (Technical
> Authentication (page 69) in the full menu)
on the browser screen.
When connection is successful, the web
remote control screen appears on the device.
[Note]
The page may not be displayed correctly on a smartphone
or other device if the viewing mode is set to mobile pages.
Change the viewing mode to desktop pages.
Web Remote Control Screen
Global Menu
Select at the top left of the web remote control
screen to display the Global Menu. Select the item
you want to configure.
Camera Control screen
The Camera Control screen contains the Camera
screen and Lens screen. Select the Camera tab to
display the Camera screen, and select the Lens tab
to display the Lens screen.
Various display items and operation buttons are
displayed on the Camera Control screen (common
to Camera screen, Lens screen, and playback
screen).
ˎ Network connection status (Connected/ ˎ
Disconnected)
ˎ Camera ID* ˎ
ˎ Rec button ˎ
ˎ Assignable buttons (1 to 4, A to C)
ˎ
* The Camera ID text color is the same color set using
Frame Line A/B Setup > Color.
Camera screen
You can configure the same items that are
displayed on the Home screen of the sub display
on the Camera screen.
[Note]
Similarly as for the sub display screen, the EI display area
switches to become the Gain display area and restrictions
apply to the items (page 33) that can be operated when
Technical > System Configuration > RM/RCP Paint Control
(page 68) is set to On in the full menu.
ˎ Shooting settings (page 31) ˎ
FPS, EI, Shutter, ND, LUT, WB
ˎ Camera status display (page 31) ˎ
Operating status, time data, audio level meter,
clip name, recording format, media status/
free space, battery voltage/remaining battery
capacity
Lens screen
Lens controls for zoom, focus, and iris are
displayed on the Lens screen.
Full Menu screen
Select Full Menu in the Global Menu to display
the full menu screen in order to configure items
(page 55).
[Note]
Some items may not be configurable from the web remote
control.