Sony VENICE MPC-3610 Operating Instructions Manual page 41

Digital motion picture camera
Hide thumbs Also See for VENICE MPC-3610:
Table of Contents

Advertisement

000 41
3. Camera Operations: User Functions Screen
Assignable Button setting
Function
Monitor High/Low Key
1)
Selects the Monitor output mode.
Switches between High Key (screen for
checking for blown-out highlights)  Low Key
(screen for checking for blocked-out shadows)
 Off (normal display) each time the button is
pressed.
Monitor False Color
1)
Turns the false color function display on a
monitor on/off.
Color Bars
Turns color bars on/off.
2)
AXS Slot Change
Switches the active slot when two AXS
memory cards are inserted.
Switches between A and B each time the
button is pressed.
SxS Slot Change
Switches the active slot when two SxS memory
cards are inserted.
Switches between A and B each time the
button is pressed.
Rec Review
Executes the Rec Review function.
VF Frame Line
Turns superimposition of frame lines on the
viewfinder/monitor screen output image on/
off.
VF Zebra
Turns the zebra function of the viewfinder/
monitor screen output image on/off.
VF Status Info
Turns the information display on the
viewfinder/monitor screen output image on/
off.
VF Focus Magnifier
Turns the focus magnifier function of the
viewfinder on/off.
Press & Hold for VF Log
Disables the LUT applied to the viewfinder/
1)
monitor screen output image while the button
is pressed, and sets Log image quality without
applying a LUT.
VF Highlight Clip Ind
Turns the function to display clipped highlight
1)
areas in red in the viewfinder on/off.
VF High/Low Key
1)
Selects the viewfinder output mode.
Switches between High Key (screen for
checking for blown-out highlights)  Low Key
(screen for checking for blocked-out shadows)
 Off (normal display) each time the button is
pressed.
VF False Color
Turns the false color function display in a
1)
viewfinder on/off.
State when unit is
Assignable Button setting
powered on
Setting not retained
Auto White Balance
Picture Cache Rec
Iris Open (1/16 stop)
Setting retained
Setting retained
Iris Close (1/16 stop)
Setting not retained
Rec
Setting retained
1)
Does not function if the button is pressed when Technical > System Configuration > RM/RCP Paint Control (page 68) is
set to On in the full menu.
2)
Does not function if the button is pressed when an RM-B170 or other remote control unit is connected and Technical >
Setting retained
System Configuration > RM/RCP Paint Control (page 68) is set to On in the full menu.
Does not function if the button is pressed when an RM-B170 or other remote control unit is connected.
3)
Setting retained
Setting not retained
Setting not retained
Setting retained
Setting not retained
Setting retained
Function
2)
Executes auto white balance. Stops execution if
pressed during auto white balance.
Turns the picture cache recording function on/
off.
3)
Opens the lens iris.
Press and hold to open the iris until fully open.
This function is available when an E mount lens
with power iris is attached.
The setting is in 1/16 stop increments, whereas
the iris indication is in units of 1/3 stop
increments.
Closes the lens iris.
3)
Press and hold to close the iris until fully closed.
This function is available when an E mount lens
with power iris is attached.
The setting is in 1/16 stop increments, whereas
the iris indication is in units of 1/3 stop
increments.
Starts/stops recording.
State when unit is
powered on
Setting retained

Advertisement

Table of Contents
loading

Table of Contents