Sony VENICE MPC-3610 Operating Instructions Manual page 38

000 38
3. Camera Operations: Operations on the Home Screen of the Sub Display
Item Description
Exposure Index Sets the EI value. You can change the Base ISO setting by pressing the Change
Base button (ITEM key 4) and then simultaneously pressing the two Change
buttons (ITEM key 1 and ITEM key 3) on the subsequent screen. The available
settings vary as follows depending on the Base ISO setting.
Base ISO 500:
125EI/160EI/200EI/250EI/320EI/400EI/500EI/640EI/800EI/1000EI/1250EI/
1600EI/2000EI
Base ISO 2500:
640EI/800EI/1000EI/1250EI/1600EI/2000EI/2500EI/3200EI/4000EI/5000EI/
6400EI/8000EI/10000EI
Shutter Sets the electronic shutter angle/shutter speed.
Press the Step/Cont. button (ITEM key 1) to switch between step and continuous
selection methods.
Step: Select from up to 16 preset values registered as shutter steps. You can press
the Step Edit button (ITEM key 4) to change any setting from the preset value after
selection.
Displays the following selection options depending on the Technical >
System Configuration > Shutter Mode (page 68) setting in the full menu.
Angle: Shutter angle indicator
Default selection options
360/180/172.8/144/90/45/22.5/11.2/5.6
Speed: Shutter speed indicator
Default selection options
1/24, 1/25, 1/30, 1/50, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000
[Note]
The default speed values for different Project Frame Rate (page 44) settings are
given below.
23.98/24: 1/24, 25: 1/25, 29.97: 1/30, 47.95: 1/48, 50: 1/50, 59.94: 1/60
Cont.: Select an angle/speed within the supported range.
ND Filter Sets the ND filter position. The following settings are available.
Clear/0.3/0.6/0.9/1.2/1.5/1.8/2.1/2.4
Item Description
LUT Configures settings related to the LUT to apply to the output video.
Page 1
SDI 1/2 (ITEM key 2): Log
Display only, as LUT cannot be applied to the SDI 1/2 output image.
SDI 3/4 (ITEM key 3): Log/Look
Selects the LUT to apply to the SDI 3/4 output image.
Disabled when Monitoring category > Output Format > SDI 1/2 is set to 4K/
QFHD in the menu.
Monitor (ITEM key 5): Log/s709/R709(800%)
Selection becomes Log/Look when Monitoring category > Output Format >
SDI 1/2 is set to 4K/QFHD in the menu.
HDMI (ITEM key 6): Log/s709/R709(800%)
Fixed to Log when Monitoring category > Output Format > SDI 1/2 is set to
4K/QFHD and HDMI is set to 4K/QFHD in the menu. In all other cases, the
options are the same as for Monitor.
Page 2
Viewfinder (ITEM key 2): Log/s709/R709(800%)
Selects the LUT to apply to the viewfinder/monitor screen output image.
SxS Rec (ITEM key 5): Log/Look
Disabled when Project category > SxS Rec Format is set to Rec Off in the
menu, or fixed to Log when set to XAVC.
Sub Rec (ITEM key 6): Log/Look
Disabled when Project category > SxS Rec Format is set to Rec Off in the
2)
menu.
Page 1/2 common items
Edit Look: Sets a LUT to apply as a Look.
s709 / R709(800%) / S-Gamut3.Cine/SLog3 / S-Gamut3/SLog3 / User 3D LUT
WB (White Balance) Sets the color temperature/color tone of the white balance.
Default selection options
3200K+00/4300K+00/5500K+00
You can press the Step Edit button (ITEM key 4) to change the white balance
preset value and Tint value.
Auto White Bal.: Execute auto white balance.
Only when a High Frame Rate License is activated.
1)
The options are 1/60 and subsequent values when the project frame rate is 59.94, 1/50 and subsequent values when 50.0,
2)
1/30 and subsequent values when 29.97, and 1/25 and subsequent values when 25.0.